• Award Winner
JBL

JBL Clip 2

Details

Portable Bluetooth speaker

£49.9949.99 each
Product Actions
Add to cart options
+

In stock and ready to ship

Clip and play

The JBL Clip 2 is an ultra-light, ultra-rugged and ultra-powerful portable speaker. Completely waterproof, the JBL Clip 2 provides 8 hours of playtime, allowing you to take your music wherever you go, be it land or water. Stream music wirelessly via Bluetooth, or plug it into any smartphone or tablet with its attached audio cable. You can also wirelessly connect two Clip 2 speakers together to enjoy amplified sound. Use the speakerphone to make clear, noise and echo free phone calls. The JBL Clip 2 is covered with durable waterproof fabric, and earns its name with its upgraded carabiner, clipping to your clothes or backpack to take on any adventure.

Item# JBLCLIP2GRYEU

General Specifications

Music playing time up to 8 hours (varies by volume level and audio content)
Battery charge time 2.5 hour @ 5V, 0.5A
Signal-to-noise ratio >80dB
Battery type Lithium-ion polymer (3.7V/730mAh)
Frequency response 120Hz – 20kHz (-6dB)
Output power 1 x 3W
Transducer 1 x 40mm

Dimensions

Dimensions (H x W x D) 141 x 94 x 42 (mm)
Weight 184g

Control and Connection Specifications

Bluetooth version 4.2
Bluetooth transmitter power 0 – 9dBm
Bluetooth transmitter frequency range 2.402 – 2.480GHz
Bluetooth transmitter modulation GFSK, π/4 DQPSK, 8DPSK
Click here for a complete list of all specs for this product

Spec Sheet

7 MB
  • 1 x JBL Clip 2
  • 1 x Micro USB cable for charging
  • 1 x Quick Start Guide
  • 1 x Safety Sheet
  • 1 x Warranty Card

The latest owner's manuals, quick start guides, and documents.

Search Result For ""

JBL Clip 2 is rated 4.6 out of 5 by 138.
Rated 5 out of 5 by from Very versatile Great for paddling, bike riding, boating ! Buttons could be marked better for night or bad light. I bought two and they sinc easily!!
Date published: 2017-03-13
Rated 5 out of 5 by from Very good and portable!! I got this today and it sounds awesome , speaker is worth it...:)
Date published: 2017-03-11
Rated 5 out of 5 by from Gre8 Thanks for all!, what a find and discovery! Gre8 value for the BUCKS!
Date published: 2017-03-10
Rated 5 out of 5 by from Sweet speaker I had it working in about a minute-and-a-half!!!!!!
Date published: 2017-03-08
Rated 5 out of 5 by from Easy to connect. Fast Set-up. Truly as easy as 1-2-3. Very functional. I will add sandproof in addition to waterproof. Clip2 could you a little bit more horsepower in wattage when outside with ocean waves crashing :-)). Delivery was 1 day later than at time of order but no big deal. Delivery was fast. I am very satisfied with this purchase.
Date published: 2017-03-08
  • y_2017, m_3, d_20, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_138
  • loc_en_GB, sid_jblclip2, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_jbl

My jbl clip 2 charges for about 30 secs then the red light turns off

Asked by: boii
When the CLIP 2 is charged while Off, the LED indicator would go off indicating full charge. If this is not the case and to determine where the problem is, please try to use a different USB charging cable and plug it in at an alternate power source. I noticed that you are in the Philippines. If the issue still persists, please send an e-mail to support.apac@harman.com and the Customer Service team will be more than happy to further assist you.
Answered by: Joe G at Customer Service
Date published: 2017-03-10

I wad connecting my JBL Clip 2 to my projector through the built in aux and it was running well. Then suddenly the sound stopped. I removed it from the projector and connected it with my windows phone through Bluetooth but again no sound. 

Asked by: Ussama
I’m sorry to hear about the issue you are having with the CLIP 2. Please try connecting it to a different device via AUX and pair it via Bluetooth as well. If you still do not get sound, please contact the retailer where it was purchased from. They will be able to assist.
Answered by: Miko at Customer Service
Date published: 2017-03-07

I've had my Clip 2 for 2 wks. I'm trying to charge it but the charge light isn't on; does that mean it's fully charged? When powered on, Blue light slowly blinks.

Asked by: chriscovino
I just had a lovely conversation with William at Tech Support. They think that "slow blinking blue light" means that the Clip 2 is searching for, and is not connected to, any device. But Memen's answer to this question raises another question which needs solving: Either the LED indicator will switch to a solid blue light when fully charged, or the LED indicator will go off indicating full charge. It should not be both. I would like this unit to let me know whether it is charged or not just by looking at it. And it would be really great if it would gauge how much charge it has (but this is probably an unreasonable expectation).
Answered by: Dorene
Date published: 2017-03-19

Does the clip 2 have an internal memory?  During playback in iTunes it turned off then restarted playing music I did not have in my library.  I couldn't figure where it was coming from.  Even after I shut off the Mac, it kept playing????  

Asked by: RevPDP
No, the CLIP 2 does not have an internal memory. It is highly likely that there is another device that is connected to the CLIP 2. You will need to clear the Bluetooth pairing list of the CLIP 2. Please do a reset on your CLIP 2 to try and fix your issue. While the unit is turned on, press and hold the Volume + and Phone buttons for more than two seconds. The CLIP 2 will turn off and this should reset your speaker. Pair your device to the CLIP 2 after resetting.
Answered by: Miko at Customer Service
Date published: 2017-03-16

I noticed the speaker would turn itself off to save battery life whenever it doesn't have a signal which is great. but is there a way to keep it always on if i keep it plugged to a power supply?

Asked by: AlfredoU
Unfortunately, there is no way to turn off the power-saving feature of the CLIP 2. It will go on standby mode if it does not detect any audio signal either via Bluetooth or AUX even if it is directly plugged into a power outlet.
Answered by: Miko at Customer Service
Date published: 2017-03-05

When i'm connected my clip 2 to PC (win.10 enterprise) the microphone doesn't work, it won't recieve any sound from clip 2 mic. But it works perfectly when i'm connected to mobile phone. Any solution for it?

Asked by: ugiewkn
It is possible that the CLIP 2 is simply not selected as the recording device. To check this, right click on the volume icon that should be present on the bottom right corner of your screen (taskbar) and follow this instructions – 1 - You'll see a menu that offers several choices: Open Volume Mixer, Playback devices, Recording devices, Sounds and Volume Control options. 2 - Select the Recording devices to open the Sound Control Panel. 3 – A window will pop-up showing all available recording devices, the CLIP 2 should be listed here. Select the CLIP 2 and click on the “Set Default” button.
Answered by: Miko at Customer Service
Date published: 2017-03-01

I bought a clip2 today and it seemed to be working perfectly. However, after trying to charge it, it is flashing red/blue. I have tried the resets phone and vol - and every other combination but nothing works. I'd be grateful for some assistance.

Asked by: kenn1
What you are experiencing is not normal. Please do a reset on your CLIP 2 to try and fix your issue. While the unit is turned on, press and hold the Volume + and Phone buttons for more than two seconds. The CLIP 2 will turn off and this should reset your speaker. If this doesn't help, please submit a case request at https://uk.jbl.com/support-contact.html and the Customer Service team will be more than happy to further assist you.
Answered by: Memen at Customer Service
Date published: 2017-02-28

My Clip 2 was working fine at the first time, then I charged it without turn it off and now the blue and red LEDs are blinking alternately. No button works anymore. The audio cable also doesn't work. How can I do with it now?

Asked by: Claudia Liu
I have the same problem. Bought it today for a road trip starting tomorrow but all it does is flash red and blue. Nothing works including the rest. I guess I'll just have to hope the fix Gresham suggests works. Rather disappointed and not very impressed though.
Answered by: kenn1
Date published: 2017-02-23
  • y_2017, m_3, d_20, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_162
  • loc_en_GB, sid_jblclip2, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_jbl
Sharing