• Award Winner
JBL

Cinema SB400

Details
Variations

120-watt, wireless Cinema soundbar and subwoofer

£499.99499.99 per system
Product Actions
Add to cart options
+

Back Order.

The expected in-stock date is 30 April 2017.

Bluetooth­-enabled soundbar with a powerful, 200-watt wireless subwoofer.

Bluetooth¬-enabled soundbar with a powerful, 200-watt wireless subwoofer. High-definition TV is great – but what good is it if its sound doesn’t match the quality of its video? Fortunately, the JBL® Cinema SB400 system offers cinema-quality audio in a small space and high style. Its two-channel soundbar features four 2-1/4-inch (57-millimeter) woofers, two 1-inch (25-millimeter) tweeters, an amplifier that delivers up to 120 watts, integrated Bluetooth® technology for streaming music from digital devices, three HDMI® inputs and HARMAN Display Surround technology, which creates a 3D listening environment from only two channels. The system also includes a 200-watt, 8-inch (200-millimeter) wireless subwoofer with bass-boost control. The SB400 is everything that you can ask for in a sound system.

Item# SB400/230

Device Compatibility

Bluetooth Yes

General Specifications

Frequency response 38Hz – 20kHz
Enclosure type Ported

Audio Specifications

Subwoofer Maximum Recommended Amplifier Power 100 watts
Speaker Maximum Recommended Amplifier Power 60 watts peak per channel

System Specifications

System Frequency Response 38Hz – 20kHz (–6dB)
Subwoofer Power Requirement 100V – 240V, 50/60Hz, 100W

Subwoofer Specifications

Subwoofer Low-Frequncy Transducer One 8" down-firing cone

Speaker Specifications

Speaker High-Frequency Transducer One 1" (25mm) dome per channel
Speaker Midrange Transducer Two 2-1/4" (57mm) cones per channel

Dimensions

Subwoofer Weight (kg) 10.5
Subwoofer Width (mm) 329
Subwoofer Height (in) 14
Subwoofer Depth (in) 12-5/8
Speaker Width (in) 43-5/16
Subwoofer Depth (mm) 320
Speaker Depth (in) 2-1/2
Speaker Width (mm) 1100
Subwoofer Weight (lb) 23.1
Speaker Height (in) 3-3/4
Speaker Weight (kg) 3.3
Speaker Weight (lb) 7.3
Subwoofer Height (mm) 355
Speaker Depth (mm) 64
Speaker Height (mm) 95
Subwoofer Width (in) 13
Click here for a complete list of all specs for this product

Spec Sheet (EN)

2 MB

Spec Sheet (EN)

900 KB
  • 1 Cinema SB400 soundbar
  • 1 8" (200mm) wireless subwoofer
  • 1 IR remote control
  • 1 power cable
  • 1 optical audio cable

Search Result For ""

Cinema SB400 is rated 3.0 out of 5 by 96.
Rated 5 out of 5 by from Awesome Sound I am enjoying putting this system on when I watch movies or play games. My daughter is able to enjoy it as well as it doesn't blast her out of the room but it makes her feel like she's at the theater
Date published: 2017-04-09
Rated 5 out of 5 by from it's simply awesome My house is small and my surround system was finely giving me trouble after all these years so I needed to do something. I decided to give this soundbar and sub a try despite some not so great reviews. I started off having some issues with my wifi once I hooked everything up and realized I was running too may things on a 2.4 frequency but since I have a duel frequency router, I moved everything I could to the 5 and no more issues. The sound is crisp and clear and I have no problems with the connection to the sub but believe I would have if I kept everything on 2.4. I'm thrilled that it has Bluetooth and so many HDMI connections so I have more options. JBL has never let me down in quality and value and this soundbar is no exception. Over all, just a few adjustments for me and my world is full of ear pleasing sound and worth every bit of the effort and purchase price.
Date published: 2017-02-23
Rated 5 out of 5 by from HIGH 5, JBL, I purchased this unit last year in November, it was a recertified product which is sent back to the factory, for cleaning and retested, the price was great, I was happy to finally get my SB400, after many trips to the store, nothing compares to the product, xcellent bass, thundering sound, looks great on the wall, good quality, set up was easy, once the sound bar is dialed in with the sub.It is awesome. I recommend all jbl products.
Date published: 2017-01-25
Rated 5 out of 5 by from The best, obviously i have B&O, but for that price this is increbidle!
Date published: 2017-01-16
Rated 5 out of 5 by from State of the art sound This is one perfect sound system,im obsessed with sound systems and am not easily sold.purchasing the SB400 is the best decision i ever made.its awesome awesome and just awesome
Date published: 2017-01-08
  • y_2017, m_4, d_24, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_96
  • loc_en_GB, sid_jblcinemasb400, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_jbl

hi... my sb400 tweeters stopped working and im guessing it´s either the crossover or both tweeters burned . but it´s kinda odd for both components to dis at the same time,, don´t you think???

Asked by: rubs
What you are experiencing is not normal on this speaker, do you experience the same problem on all sources like BT, AUX, HDMI. To be able to check if the unit will behave normally please perform a product reset. Place the sound bar on standby, while on standby press and hold "Vol - and "Surround Mode" for 3 seconds until the unit automatically turns on, after it turns back on the unit is back to factory settings. If the issue persist please submit a case at www.jbl.com/support-contact.html and the Customer Service team will be more than happy to assist you.
Answered by: Mel at Customer Service
Date published: 2017-04-26

Hello, is-it possible to control SB400 volume through HDMI CEC ?

Asked by: jahwisdom
No, unfortunately the SB400 doesn't have a CEC feature.
Answered by: Bryan at Customer Service
Date published: 2017-04-22

My remote control's volume control does not work. What can I do?

Asked by: vbob1234
First thing we have to make sure of is that there is nothing in between the remote and the SB400 that can cause interference with the IR signal your remote is sending to the soundbar and that you have fresh batteries on your remote. If the issue occurs after making sure that there is no interference and you have fresh batteries on the remote, complete a reset on the soundbar by following the steps below and retry the learning feature programming. While in In standby mode - Press "Volume-" (minus) button and "Surround mode" button simultaneously for approx 3 seconds - soundbar turns on - soundbar is reset. If the issue still persists, please submit a case at www.jbl.com/support-contact.html and the Customer Service team will be more than happy to further assist you.
Answered by: Joe G at Customer Service
Date published: 2017-04-13

Is there a specific wall mount device for the SB400

Asked by: Frank vdB
Yes, there is a specific wall bracket for wall mounting, the part number is ZJ0500001010. Please submit a request at www.jbl.com/support-contact.html and provide this part number. The Customer Service team will provide its pricing and availability.
Answered by: Joe G at Customer Service
Date published: 2017-04-12

Is JBL SB400 compatible with bluetooth sound card? so i can use my laptop.

Asked by: Hardwill
Yes, the SB400 is compatible with a Bluetooth Sound Card. Please make sure your laptop’s Bluetooth transmitter can support version v2.1 EDR and A2DP+SBC version: v1.2.
Answered by: Erik at Customer Service
Date published: 2017-04-05

How do I reset the volume controls. When I turn off the TV remote and the sound bar turns off. When I turn the TV back on, I have to press the power button on the sound bar to get it on and then it takes a while to get the sound bar to work.

Asked by: Mike Wilson
Please try resetting the SB400. In standby mode - Press "Volume-" (minus) button and "Surround mode" button simultaneously for approx 3 seconds - soundbar turns on - soundbar is reset. It is important not to press too hard on the Volume- button, because that will also press down the Volume+ end of the button, and the reset will not work then. In most ARC products, the Soundbar and TV essentially act as one device when both are connected via an ARC HDMI port. I assume the SB400 is connected to your TV's ARC HDMI port. If your TV features ON/OFF, please refer to your TV manuals to see if this feature can be enabled. If the issue persists, please submit a case at www.jbl.com/support-contact.html and the Customer Service team will be more than happy to further assist you.
Answered by: Joe G at Customer Service
Date published: 2017-03-24

2 - What is the ideal Crossover Frequency for the Sub? I had it at 100 when it was placed in a room with carpets and worked fine. Now it is used in a room with hardwood flooring! Unable to figure out the best number.

Asked by: ARAO
There is no specific crossover frequency settings for the sub, it's more on the user's end preference. The subwoofer’s Crossover control adjusts the subwoofer’s cutoff between 40Hz and 200Hz. The higher you set the Crossover control, the higher in frequency the subwoofer will operate and the more its bass will “overlap” that of the soundbar. This adjustment helps achieve a smooth transition of bass frequencies between the subwoofer and the soundbar for a variety of different rooms and subwoofer locations. If the bass seems too strong at certain frequencies, try a lower Crossover control setting. If the bass seems too weak at certain frequencies, try a higher Crossover control setting.
Answered by: Miko at Customer Service
Date published: 2017-03-31

Hi can the SB400 be connected to another speaker? I have the JBL EXTREME. 

Asked by: Timorphan
No. The SB400 does not have the JBL Connect feature. The SB 450 and BOOST TV are currently the only soundbars that has JBL Connect.
Answered by: Miko at Customer Service
Date published: 2017-03-15
  • y_2017, m_4, d_29, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_107
  • loc_en_GB, sid_jblcinemasb400, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_jbl
Sharing