Cinema BD100


A 5.1-channel home theater system with 3D Blu-ray Disc receiver

Product Actions
Complete, versatile, 5.1-channel home theater system in one box.

Easy to set up and operate, the JBL® Cinema BD100 proves that a home theater system doesn’t have to be complicated to be compelling. It includes a 3D Blu-ray Disc™ receiver with a built-in six-channel amplifier, a subwoofer, a center-channel speaker and four satellite speakers. We’ve voice-matched the speakers for a superior surround-sound experience and included integral color-coded wires to simplify setup. With Dolby® TrueHD and DTS-HD Master Audio™ decoding, the Cinema BD100 delivers movie sound as the moviemakers intended. Its Dolby Pro Logic® II turns any stereo source into a full surround experience. Bluetooth® connectivity lets you stream audio wirelessly from any Bluetooth device. A front-panel USB port lets you play audio from USB sticks, while a DLNA®-compatible network connection streams content from other devices on your home network. The system even streams entertainment from the YouTube™ and Pandora® content service, among others. For over 60 years, JBL engineers have crafted the precise, naturally articulated sound found in cinemas, arenas and recording studios around the world. That legendary JBL sound now enhances your home theater experience with a complete, 5.1-channel system. The Cinema BD100 is all you need to turn your TV into a versatile home entertainment system.

Item# CINEMA BD100

Device Compatibility

Bluetooth Yes

General Specifications

Power consumption 90W
Full-range transducer 2-1/2" (63.5mm)

Audio Specifications

System Frequency Response 20Hz-20kHz

System Specifications

Power Consumption (Full Power/Idle) 90W
Amplifier Power (RMS) 300W
Power Consumption (Standby) 100V-240V AC, 50/60Hz

Subwoofer Specifications

Subwoofer Low-Frequncy Transducer 5-1/4" (133mm) cone
Subwoofer_Enclosure Type Bass-reflex

Speaker Specifications

Speaker Midrange Transducer 2-1/2" (64mm) cone

Satellite Speaker Specifications

Satellite Midrange Transducer 2-1/2" (64mm) cone
Click here for a complete list of all specs for this product

Spec Sheet (EN)

1 MB
  • 1 Blu-ray Disc receiver
  • 4 satellite speakers with integral, color-coded speaker wires
  • 1 voice-matched center-channel speaker with integral, color-coded speaker wire
  • 1 compact subwoofer with integral, color-coded speaker wire
  • 1 FM wire antenna
  • Quick-start guide
  • Warranty card

Search Result For ""

Cinema BD100 is rated 3.0 out of 5 by 9.
Rated 5 out of 5 by from It is awesome and I would refer it to everyone that I knnow
Date published: 2017-04-21
Rated 5 out of 5 by from Excellent Home Theater This home theater has it all for its price, once you set it up correctly the home theater puts you in the Movie, sound is great, setup is easy, voice detail is awesome. Thank sJBL.
Date published: 2015-08-05
Rated 4 out of 5 by from Cinema DB 100 Bought a week or so ago for my son and he says they don't fall out and good sound quality
Date published: 2017-06-01
Rated 3 out of 5 by from It won't support 3D blu-ray Disc It won't play 3D blu-ray Disc. When I insert 3d disc into the player, it is saying that please insert the disc into 3d player.
Date published: 2016-01-22
Rated 3 out of 5 by from Good Sound But Software Needs Work I am a sound engineer and use JBL often for shows so when it came to picking a new amp when my old one died they were in my top three right off. The sound is what you can expect for the price point but the part that is bugging me is the problems with the software. 1. The available decoders for audio and video are hit or miss for my collection. In example I can play one set of MP4s no problem but another set fail. Can we just get the whole set please? 2. File sorting is driving me nuts. You go and label all your files by hand so they should be read A-Z (with numbers as a secondary priority in the case of TV shows) and they still end up out of order. The system could use a way to order the files by hand in it's own menus without having to resort to play lists
Date published: 2014-07-24
  • y_2018, m_12, d_17, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_GB, sid_cinemabd100, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_jbl

the speakers work just fine but the volume gets too low even when its turned up at 100 volume only when connected via bluetooth from any device.

Asked by: rmidha4
The volume on my source is also as high as possible. I also tried to change the source, at first i was playing via mac book, then played via iphone and also checked it with samsung, no improvement, same low volume. It was working well in the beginning but since the past few months this is a permanent problem.
Answered by: rmidha4
Date published: 2017-12-02

I have a previously mounted pair of speakers from my current system, hard wired through the attic and wall, opposite the wall where my TV is mounted. Can I use these speakers with this system, instead of the rear speakers provided,w/o damaging the BD100?

Asked by: Spike OK
We would like to work with you directly to help you with your issue. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Mario at Customer service
Date published: 2017-12-02

Is it a wireless system, Is it compatible for 50 squar feet room or shall i go for JBL BD 300 

Asked by: raju
The  speakers are color coded wired. For your room size only you can answer it finding the right system that meets your needs.
Answered by: ScottInWinterHaven
Date published: 2017-12-02

quisiera saber como puedo emparejar mi pc lappto con el bluetooth del cinema db100, debido a que hago la conecxion y me da error, debido a que me dice que el dispositivo periferico de bluetooth no esta instalado, y que instale un controlador mas reciente,

Asked by: JASM27
The error Bluetooth Peripheral Device Driver means that particular driver is not installed in your laptop. You may need to download and install the Bluetooth Peripheral Device Driver from your operating system for you to be able to pair your laptop and the BD100. I noticed that you are in Venezuela. Should you need further help, please send an e-mail to clara.cifuentes@harman.com.
Answered by: Nick F
Date published: 2018-02-06

How to connect the wireless home Wifi.?

Asked by: Cindy abc
The BDS100 cannot be connected wirelessly through a wi-fi network . But it can be connected to your wi-fi router using a Cat. 5 or Cat. 5E Ethernet cable, available at any electronics store. This will let you stream content wirelessly from DLNA®-compatible devices on your local area network or one of the available on-line streaming services.
Answered by: Joe G at Customer Service
Date published: 2017-12-02

Is this product wireless? Does it have a warranty?

Asked by: Gina
All our products have one year manufacturers warranty. The BD100 is also Bluetooth compatible.
Answered by: Amir at Customer Service
Date published: 2016-07-13
  • y_2018, m_12, d_17, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_GB, sid_cinemabd100, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_jbl