Yes. Our JBL Go 3 can be connected to any Bluetooth-capable source device.

The USB Type-C port is intended for charging your JBL GO 3. It only connects to a source device via Bluetooth connection.

Thank you for your question, by pressing the "On" button again.

It is mandated by California law to put a warning label on products if it used materials and/or chemicals on their list that are considered hazardous. Please note that the use of these hazardous items is under very strict regulations and guidelines to ensure the product will not pose any potential hazard to our customers. The label is for awareness purposes.

Most of our portable speakers have 5 diodes to indicate the battery charge level. Since our JBL Go 3 has one diode and 5 hours of music playtime when fully charged, it's safe to say that you're at 20% battery life when the led indicator starts blinking.

You may use any Type-C charging cable as a replacement. You may also order a JBL Type-C cable through our Customer Service for parts replacement. Here's the link. https://support.jbl.com/us/en/#contact

Our JBL Go 3 does not have a function to connect with other speakers, and our JBL soundbar is a stand-alone speaker system that doesn't require additional speakers to be connected.

Although smaller in size, JBL Go 3 is a bit louder compared with JBL Go 2. The rectangular transducer provides 4.2 watts RMS compared with the JBL Go 2's 3.1 watts RMS.

Only the JBL GO 3 Eco has the benefit of being covered in environmentally friendly materials, while both the regular and eco model feature a sturdy outer layer consisting of a combination of tightly-knit fabric and rubberized plastic.

Thank you for your question. If possible, please use a different power cable and charge from a different power source. If these steps do not offer you a solution, feel free to contact our Customer Support Team on https://uk.harmanaudio.com/support-contact.html#ns for further assistance. Thank you.

Unfortunately, there's no option to disable the on and off prompt of our JBL Go 3.

The JBL Go 3 is IP67 waterproof and dustproof, so you can bring your speaker anywhere.

Thank you for your question. No, the JBL Go 3 uses SBC codec. Should you wish to receive further support, you may contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance. Please see https://uk.harmanaudio.com/support-contact.html#ns for further details. Thank you.

There is no available firmware update for our JBL Go 3 speaker at the moment.

Yes. You could use that USB charger as it will negotiate the correct voltage that the JBL GO 3 requires to charge correctly.

Thanks for your inquiry. Our JBL Go 3 is compatible with both Android and iOS mobile devices. Please make sure that the Bluetooth of your source device is on, and there are no other source connected. You can try resetting the speaker and manual pairing procedure. First, power on the speaker. Press and hold the Volume + button and the Bluetooth button together for 3-5 seconds until the speaker turns off. Once turned off, the speaker has been reset to the factory default settings. Then, turn your Bluetooth back on your mobile device and power on the speaker. It should automatically go into pairing mode and pop up on your discoverable BT devices. Choose the JBL GO 3, and now the speaker should be connect to your device. If these steps do not fix the problem, please reach out to our customer support.

Our JBL Go 3 can only pair with one Bluetooth-capable device at a time. If you need more help, please contact our customer support for assistance.

Thank you for your question. It is not normal for the unit to turn off when used on the highest volume. Please try charging your JBL Go 3 with a different power cable and from a different power source. If these steps do not offer you a solution, please contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance. Please see https://uk.harmanaudio.com/support-contact.html#ns for further details. Thank you.

Our JBL Go 3 can only pair with one Bluetooth-capable device at a time. For more information about the speaker, check it out here: https://support.jbl.com/us/en/speakers/speakers-bluetooth-wireless/GO+3-.html?color=orange

Prop 65 is included on the majority of our products to create awareness of possible Prop 65-listed chemicals being present. Please note that when used as intended, our products are absolutely safe to use and comply with all regulations. For a deeper explanation on Prop 65, please go to https://oehha.ca.gov/proposition-65/general-info/proposition-65-plain-language

Thanks for your inquiry. We don't have a way to download music onto our JBL Go 3 since it is a Bluetooth-enabled speaker. If you need more help, please contact our customer support.

Thank you for your question. Unfortunately, we do not have any information about the release date of the GO 3 squad colour. I would suggest to sign up to our news letter for further updates. Should you wish to receive further support, you may contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance. Please see https://uk.harmanaudio.com/support-contact.html#ns for further details.  Thank you.

Thanks for your inquiry. Our JBL Go 3 is a stand-alone Bluetooth speaker. It will not be able to connect to other speakers and stereo systems.

Our JBL GO 3 doesn't require a PIN code when connecting to a Bluetooth source device. If the following default PIN codes don't work 0000, 1111, or 1234, you may reach out to the manufacturer of your source device for further assistance.

As soon as product comes in stock.

Thanks for your interest in our products. We have no news yet of when we'll have a personalized option for our JBL GO 3. Please subscribe to our newsletter at the bottom page of our website, to receive the latest news and updates about our products: https://www.jbl.com/

Our JBL Go 3's power-saving feature can't be turned off. It is intended to conserve battery life when the product is not in use. We appreciate your feedback and value your input. We'll make sure to share your feedback with the appropriate team.

Thanks for your question. IP67 rating is both waterproof and dustproof, while IPX7 is only waterproof.

Our JBL Go 3's LEd light indicator will turn off as soon as the speaker is fully charged. The red steady light means that the device is charging. You may download the owner's manual of the JBL Go 3 here: https://ca.jbl.com/GO+3-.html

When the light indicator between the power button and the Bluetooth button turns off, it indicates that your JBL Go 3 speaker is fully charged. The red steady light means that the device is charging while the red blinking light means the unit has a low battery.