JBL Stage A130
£229.99
5.0 (2)
Write a review
JBL Stage A130 5.25-inch (133mm) Polycellulose Low-Frequency Woofer - Image

5.25-inch (133mm) Polycellulose Low-Frequency Woofer

JBL Stage A130 New High Definition Imaging (HDI) Waveguide - Image

New High Definition Imaging (HDI) Waveguide

JBL Stage A130 1-inch (25mm) Aluminum Dome Tweeter - Image

1-inch (25mm) Aluminum Dome Tweeter

Features

JBL Stage A130 Two-tone Unique Design for wood - Image

Two-tone Unique Design for wood

Specs & Downloads

Item# JBLA130BLK

Description

JBL A130

Designed and engineered in JBL’s world-famous acoustic engineering facility in Northridge, California, the Stage A130 is the 5.25-inch 2-way bookshelf loudspeaker of the JBL Stage Series. The narrow footprint features a 2-way design with patented High-Definition Imaging (HDI™) waveguide geometry, 1-inch (25mm) Aluminum dome tweeter, and 5.25-inch (133mm) Polycellulose cone woofers for signature JBL bass.

General Specifications

2 way, 5.25" woofer, 1" aluminum tweeter bookshelf loudspeakers

5.25" (133mm) Polycellulose Low-Frequency Woofer

New High Definition Imaging (HDI) Waveguide

1” (25mm) Aluminum Dome Tweeter

Recommended Amplifier Power
20 – 125W
Frequency Response
55Hz – 40kHz
Sensitivity
86dB @ 1M, 2.83V
Nominal Impedance
6 Ohms
Crossover Frequencies
3.2kHz
Enclosure Type
Bass-Reflex via Rear-Firing Tuned Port
Dimensions (W x D x H)
190 x 230 x 321mm
Weight (each)
12.02 lbs (5.45kg)

Documents & Downloads

Reviews and Q&A

Customer Reviews

  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';

Product Q&A

Does this come with one speaker or two? 

Asked by: Crazyeyes
Our JBL Stage A130 comes in pairs. Listed below are the components included in the box: 2 x JBL Stage A130 Bookshelf Loudspeaker 1 x Owner’s Manual 1 x Warranty Card 8 x Feet Pads
Answered by: Customer Support
Date published: 2022-08-25

Do the Stage A-130 speakers (rated 20 - 125 w, 6 ohms) work with the Yamaha TSR-7859 7.2 which has rated output power of 110 W (8 ohms, 0.9% THD)

Asked by: JAC11332
Yes. JBL Stage A130 will work with the Yamaha TSR-7850 AVR. However, it's advised not to maximize the volume to avoid overworking the speaker since the impedance (ohms) of the receiver is greater than the speaker. For questions and recommendations, please reach out to us through this link: https://support.jbl.com/us/en/#contact
Answered by: Rhae
Date published: 2021-06-06

Can I pair this with a Cambridge SoundWorks wired subwoofer?

Asked by: JChris
Unfortunately, it's not possible to pair our JBL Stage A130 directly with a wired subwoofer since this product is a passive speaker that requires to be connected to an amplifier. For more information, check out the Owners Manual here: https://bit.ly/2pLJn24
Answered by: Mario at Customer service
Date published: 2021-06-06

Does this size speaker provide keyhole for wall mounts or do you provide hooks. Or is this only on the 120.

Asked by: Deango
Our JBL Stage A130 Bookshelf Speakers doesn't come with mounting brackets since the unit was designed to stand on a flat surface with clearance between the back of the speaker and the wall because of the unit's rear-firing bass reflex port.
Answered by: Customer Support
Date published: 2022-01-11

I have a Sony receiver model strdh190 will these stage a130 Speakers work 

Asked by: Jim Bob
JBL Stage A130's recommended amplified power is at 20-150W with a nominal impedance of 6 ohms. It will depend on the specifications of your receiver if it's compatible with our speaker. If you have more questions, please reach out to our Customer Support. http://bit.ly/30JI2G4
Answered by: Rhae
Date published: 2021-06-06

Whats the difference between the JBLA130BLKAM and JBLA130BLK?

Asked by: Labguy
Both represent JBL Stage A130. They are just identifiers from which stocks they’re coming from when you order one. For more information or if you need more help, please contact us here: https://support.jbl.com/us/en/
Answered by: Ray at Customer Support
Date published: 2021-06-06

Would these speakers work well if I’m trying to connect them to my record player or should I consider a different type?

Asked by: nicole52
Our JBL Stage A130 requires an amplifier with recommended power: of 20-125 watts and a preamp for it to be compatible with any record player.
Answered by: Customer Support
Date published: 2021-12-15

What is the recommended height/distance for these speakers? If I were to buy stands, how high should they be off of the ground and how far apart should the speakers be placed for optimal sound?

Asked by: DennisJ
Our JBL Stage A130 Bookshelf Speakers doesn't come with mounting brackets since the unit was designed to stand on a flat surface with clearance between the back of the speaker and the wall because of the unit's rear-firing bass reflex port.
Answered by: Customer Support
Date published: 2022-09-06

is this two speakers or one

Asked by: ml2316
You get 2 units when you purchase our JBL Stage A130 Bookshelf Loudspeaker.
Answered by: Customer Support
Date published: 2022-06-08

as i understand, this does not come with all mount due to its build. is it recommended or possible to wall mount it?

Asked by: ph110
Yes. You may wall mount the JBL Stage A130. Just wake sure to leave a little space between the wall and the speaker for better audio output.
Answered by: Customer Support
Date published: 2022-06-12

Would these work well with my record player? Or do I need to get other equipment? Do I need an amp or will they work without one?

Asked by: Joeshamwrok
Our JBL Stage A130 is a passive bookshelf speaker. It has to be connected to an amplifier to output sound. The recommended amplifier power for this speaker would be 20 – 125W.
Answered by: Customer Support
Date published: 2022-02-25

Were can I get a manual for my EON10 2 Way /Stage Monitors

Asked by: ghstdncr

How do I order the two-tone wood ones. I don't see an option to choose these. 2 x JBL Stage A130 Bookshelf Loudspeaker 

Asked by: TwoTone
  • y_2022, m_12, d_6, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_21
  • loc_en_GB, sid_stagea130, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_jbl
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 4ms
  • questions, product

Support